 |
 |
ambient housings
home • accessories
In the design of our housings we have paid particular attention to
the following:
- light tightness
- electrostatic and magnetic screening
- the use of high quality insultators and components
to guarantee stability of components
A voltage divider is supplied with each housing but before ordering
please decide on the HV polarity. We recommend positive HV for most
applications, except analogue detection where the anode must be close
to ground potential and negative HV must be used. Please speak to us
if you are unsure of the best voltage divider for your application.
QL30 series - Ø30 mm end window photomultipliers.
View drawing
Features include:
- internally threaded front end
- flanged version, QL30F, with integral 'O' ring, and
light-tight seal
- quick release base assembly
- voltage divider or power base
- electrostatic and magnetic shielding
- optional RFI shielding
- options of amplifier-discriminators, gating boards
and amplifiers
- adaptor to fit onto vacuum systems available
- QL30-04 includes a cfd and amplifier
B2 series - Ø52 mm end window photomultipliers.
View drawing
Features include:
- accomodates Ø30, Ø38 and Ø52
end-window photomultipliers
- magnetic shield and voltage divider fitted as standard
- RF shielded version for electrically noisy environments
- long barrel version for 155 mm and longer photomultipliers
- flanged version, B2F, with integral 'O' ring, and
light-tight seal
- can incorporate amplifiers, amplifier-discriminators,
gating circuits etc.
- adaptor to fit onto vacuum systems available
B2/001 compact series.
View drawing
Specifically designed Ø52 mm photomultipliers with a seated
height of 100 mm.
Features include:
- compact design
- magnetic shielding and C647 voltage divider fitted
as standard
- flanged version, B2/100F, with integral 'O' ring,
and light-tight seal
- can incorporate amplifiers, amplifier-discriminators,
gating circuits etc.
SWH series - Ø30 mm side window photomultipliers.
View drawing
Features include:
- hard nickel plated finish
- electromagnetically shielded socket assembly with
divider or power base
- optional mumetal* shutter version
- optional filter holder
Contact us for further information.
Request a quotation.
* Mumetal is a registered trade mark of Magnetic Shield
Corportion. |
